PVS Series Angle Seat Valve Proximity Switch / PVM Manual Override for Stroke Limiting

PVS Series Angle Seat Valve Proximity Switch For Position Feedback

•PVS Series Pneumatic Angle Seat Valve Actuator With Switch

•2/2-way Angle-Seat Valve for medium up to +180℃

•Proximity Switch for Position Feedback

•Connection is available on customer request DN 15-100

PDF Catalog: 

PVE Angle Seat Drain Valve actuator with solenoid valve PVS switch PVM manual override.pdf

1.NC and NO universal actuators with proximity switch up to control heads;

2.Switch can be easily installed on the  actuator;

3.Switch signal can be transmitted to PLC etc to show the valve on or off.

Technical data

1.Voltage: 6-36V DV (direct current); 90-250V AC (alternating current)

2.Protection class: IP65-IP67

3.Detection distance: 3~5mm Ambient tempreture: -25~70℃

PVM Manual Override for Stroke Limiting

•PVM Series Pneumatic Angle Seat Valve Actuator With Manual Override

•2/2-way Angle-Seat Valve for medium up to +180℃

•Connection is available on customer request DN 15-100

1.Adjust piston position, limits stroke and regulate flow volume of the Valve

2.Applicable for all series of angle seat valve, and works as emergency override in cases when the contolling air source suffers no

 mechanical (solenoid valve) failure.

Specification

1.The hand wheel for PA actuator works on valves

in normally closed condition, functioning as stroke limiter, flow regulator and emergency  valve-opener

(lack of pilot fluid, machinery damaged, lock of piloting  signal)

2.The hand wheel for stainless steel actuators works as valves in normally open condition, funcationing as emergency  valve-closer.

3.For detected application and slection advice, PLS contact sales department.

PVM Angle Seat Drain Valve actuator manual override.pdf